Structural properties of Urfa stone doped with erbium oxide

In this study, we investigated the structural properties of Urfa stone (US) doped with erbium oxide (Er₂O₃). Solid US was powdered by using an agate mortar, and its elemental composition was determined using inductive coupling plasma (ICP) methods. Varying amounts of Er₂O₃ (5, 10, 20, 30, and 40%) were added as a dopant to the US powder using mechanical alloying methods. The resultant samples were sintered at 1000 °C for 1 h. The structural properties of the Er₂O₃-doped US samples were subsequently investigated using X-ray diffraction (XRD), Fourier-transform infrared spectrometry (FTIR), and photoluminescence methods. Results from the XRD analysis of the Er₂O₃-doped US powder indicated two crystalline phases: (1) calcium oxide (CaO) or lime and (2) Er₂O₃. After the samples were sintered at 1000 °C, CaO, Er₂O₃, calcium carbonate (CaCO₃), and mixed crystalline phases were observed. Results from the FTIR analysis of the Er₂O₃-doped US samples indicated absorption bands at 711.91, 872.08, and 1396.87 cm^?1 in the spectra. Finally, photoluminescence analysis results indicated a shift in the emission and excitation bands to longer and shorter wavelengths, respectively, in the solid state (non-aqueous media) US-Er complex.     

Chemical composition of rock-forming minerals and crystallization physicochemical conditions of the Middle Eocene I-type Haji Abad pluton,SW Buin-Zahra,Iran

The Haji Abad intrusion is a well-exposed Middle Eocene I-type granodioritc pluton in the Urumieh–Dokhtar magmatic assemblage (UDMA). The major constituents of the investigated rocks are K-feldspar, quartz, plagioclase, pyroxene, and minor Fe–Ti oxide and hornblende. The plagioclase compositions fall in the labradorite, andesine, and oligoclase fields. The amphiboles range in composition from magnesio-hornblende to tremolite–hornblende of the calcic-amphibole group. Most pyroxenes principally plot in the field of diopside. The calculated average pressure of emplacement is 1.9 kbar for the granodioritic rocks, crystallizing at depths of about 6.7 km. The highest pressure estimated from clinopyroxene geobarometry (5 kbar) reflects initial pyroxene crystallization pressure, indicating initial crystallization depth (17.5 km) in the Haji Abad granodiorite. The estimated temperatures using two-feldspar thermometry give an average 724 °C. The calculated average temperature for clinopyroxene crystallization is 1090 °C. The pyroxene temperatures are higher than the estimated temperature by feldspar thermometry, indicating that the pyroxene and feldspar temperatures represent the first and late stages of magmatic crystallization of Haji Abad granodiorite, respectively. Most pyroxenes plot above the line of Fe³⁺?=?0, indicating they crystallized under relatively high oxygen fugacity or oxidized conditions. Furthermore, the results show that the Middle Eocene granitoids crystallized from magmas with H₂O content about 3.2 wt%. The relatively high water content is consistent with the generation environment of HAG rocks in an active continental margin and has allowed the magma to reach shallower crustal levels. The MMEs with ellipsoidal and spherical shapes show igneous microgranular textures and chilled margins, probably indicating the presence of magma mixing. Besides, core to rim compositional oscillations (An and FeO) for the plagioclase crystals serve as robust evidence to support magma mixing. The studied amphiboles and pyroxenes are grouped in the subalkaline fields that are consistent with crystallization from I-type calc-alkaine magma in the subduction environment related to active continental margin. Mineral chemistry data indicate that Haji Abad granodiorites were generated in an orogenic belt related to the volcanic arc setting consistent with the subduction of Neo-Tethyan oceanic crust beneath the central Iranian microcontinent.     

The measurement of soil gases and shallow temperature for determination of active faults in a geothermal area: a case study from Ömer–Gecek,Afyonkarahisar (West Anatolia)

Afyonkarahisar is a very important geothermal province of western Anatolia and has low and medium enthalpy geothermal areas. This study has been carried out for the preparation of distribution maps of soil gases (radon and carbon dioxide) and shallow soil temperature and the exploration of permeable tectonic regions associated with geothermal systems and reveal the origins of radon and carbon dioxide gases. The western district of the study area is characterized by the high radon concentration (168.30 kBq/m³), carbon dioxide ratio (0.30%), and soil temperature (21.0 °C) values. Fethibey and Demirçevre faults, which allow the circulation of geothermal fluids, have been detected in the distribution maps of radon, carbon dioxide, and shallow depth temperature and the directions of the curves in these maps correspond to the strikes of Demirçevre faults. The effect of the fault plays an important role in the change of carbon dioxide concentration along the W-E directional geological section prepared to determine the change of soil gas and shallow depth temperature values depending on lithological differences, fault existence, and geothermal reservoir depth. On the other hand, it was determined that Rn²²² concentration and soil temperature changed as a function of geothermal reservoir depth or lithological difference. Tuffs in Köprülü volcano-sedimentary units are the main source of radon due to their higher uranium contents. Besides, the carbon dioxide in Ömer–Gecek soils has geothermal origin because of the highest carbon dioxide content (99.3%) in non-condense gas. The similarities in patterns of soil temperature, radon, and carbon dioxide indicate that the variation in soil temperatures is related to radon and carbon dioxide emissions. It is concluded that soil gas and temperature measurements can be used to determine the active faults in the initial stage of geothermal exploration successfully.     

Uncertainties in Grout Penetrability Measurements; Evaluation and Comparison of Filter pump,Penetrability Meter and Short Slot

To measure grout penetrability in fractured hard rock, various measuring instruments have been developed over the years. Penetrability meter and Filter pump have been designed to use in both the lab and the field. Short slot has been applicable mainly in the lab due to its complexity. The fact, that these instruments have been built based on different assumptions, limitations, and test conditions, makes their results occasionally in contradict. Deficiency in design of the instruments as well as the methods of evaluating grout penetrability is additionally a basis for uncertainty in results. This study is an experimental effort to determine and thoroughly perceive the nature of the most governing uncertainties in grout penetrability measurements. The test apparatus, procedure, and method used to evaluate the grout penetrability in both Penetrability meter and Filter pump were thus modified. The aim was to control the corresponding uncertainties and make their limitations and test conditions as similar as possible with the ones in Short slot. The results suggested that to obtain a more realistic evaluation of the grout penetrability, measurement should be accomplished at both the high and the low pressures with sufficient grout volume using Short slot. Moreover, application of both Filter pump and Penetrability meter is no longer recommended due to the revealed uncertainties.     

2-D delineation of individual citrus trees from UAV-based dense photogrammetric surface models

One of the challenges of remote sensing and computer vision lies in the three-dimensional (3-D) reconstruction of individual trees by using automated methods through very high-resolution (VHR) data sets. However, a successful and complete 3-D reconstruction relies on precise delineation of the trees in two dimensions. In this paper, we present an original approach to detect and delineate citrus trees using unmanned aerial vehicles based on photogrammetric digital surface models (DSMs). The symmetry of the citrus trees in a DSM is handled by an orientation-based radial symmetry transform which is computed in a unique way. Next, we propose an efficient strategy to accurately build influence regions of each tree, and then we delineate individual citrus trees through active contours by taking into account the influence region of each canopy. We also present two efficient strategies to filter out erroneously detected canopy regions without having any height thresholds. Experiments are carried out on eight test DSMs composed of different types of citrus orchards with varying densities and canopy sizes. Extensive comparisons to the state-of-the-art approaches reveal that our proposed approach provides superior detection and delineation performances through supporting a nice balance between precision and recall measures.     

Empirical assessment of rockfall and debris flow risk along the Karakoram Highway,Pakistan

Natural Hazards - The Karakoram Highway links north Pakistan with southwest China. It passes through unique geomorphological, geological and tectonic setting. This study focused 200-km-long section...     

Buildings Damages after Elazığ, Turkey Earthquake on January 24, 2020

A 6.8-magnitude earthquake that occurred on January 24, 2020, has been effective in Turkey’s eastern regions. The earthquake, with recorded peak ground acceleration (PGA) value of 0.292 g, caused the destruction or heavy damage of buildings, especially in the city center of Elaz?? province. The purpose of this paper was to share the results of detailed investigation in the earthquake-stricken area. Additionally, the causes of damages and failures observed in the buildings were compared to those that had occurred in previous earthquakes in Turkey. In this study, the damages observed in especially RC buildings as well as in masonry and rural buildings were summarized, the lessons learned were evaluated, and the results were interpreted with reference to Turkish earthquake codes. In the study, it was particularly emphasized why the building stock underwent such damage even though the buildings were exposed to earthquake acceleration well below the design acceleration values.

     

Damage Estimation in Masonry Buildings Based on Excavation-Induced Ground Movements

Excavation-induced ground movements and the resulting damages to adjacent structures and facilities is a source of concern for excavation projects in urban areas. The concern will be even higher if the adjacent structure is old or has low strength parameters like masonry building. Frame distortion and crack generation are predictors of building damage resulted from excavation-induced ground movements, which pose challenges to projects involving excavations. This study is aimed to investigate the relation between excavation-induced ground movements and damage probability of buildings in excavation affected distance. The main focus of this paper is on masonry buildings and excavations stabilized using soil nail wall method. To achieve this purpose, 21 masonry buildings adjacent to 12 excavation projects were studied. Parametric studies were performed by developing 3D FE models of brick walls and excavations stabilized using soil nail wall. Finally, probability evaluations were conducted to analyze the outputs obtained from case studies. Based on the obtained results, simple charts were established to estimate the damage of masonry structures in excavation affected distance with two key parameters including “Displacement Ratio” and “Normalized Distance”. The results also highlight the effects of building distance from excavation wall on its damage probability.

     

Effect of Drain Pipes on Uplift Force and Exit Hydraulic Gradient and the Design of Gravity Dams Using the Finite Element Method

Geotechnical and Geological Engineering - The effects of diameter and location of drain pipes on the uplift force and exit hydraulic gradient for a gravity dam are investigated. A numerical model...